Science and Technology of Delimitation of Continental Shelf and Its Application in Maritime Silk Road Cooperation*     

Qiuci Sun  Yinxia Fang  Jiabiao Li 《地球科学进展》2018,33(12):1215-1222

Delimitation of the continental shelf is an emerging interdisciplinary discipline in the field of international marine science and technology. It uses the scientific and technological means to expand the jurisdiction of coastal states based on the international rules of the 《United Nations Convention on the Law of the Sea》. Therefore, it is related to the marine sovereignty rights and interests of a country and also a hot topic of science and technology that all countries have competed to develop. China has launched the research in this field simultaneously with the world's maritime powers, and formed its innovative advantages in such aspects as geological models, detection techniques and delimitation systems in the delimitation of continental shelf, which have become the brand new ties for China's cooperation with foreign countries in marine science and technology, and also the important field in the maritime silk road cooperation in the 21^st century. This paper introduced the basic principles and methods in the delimitation of continental shelf beyond 200 nautical miles (370 km), progress in the delimitation of the global continental shelf, and China's innovative science and technology as well as its application in maritime Silk Road cooperation, and provided the prospect of the future scientific and technological cooperation with foreign countries and development in this filed. And it was suggested China should develop the scientific and technological cooperation on the delimitation of the continental shelf along the Silk Road, promote the scientific and technological development of the delimitation of the continental shelf in China, and enhance China's influence and voice in international ocean affairs.  相似文献   

准噶尔盆地吉木萨尔凹陷梧桐沟组层序地层划分     

郭佳  宋双  王一博 《江苏地质》2018,42(4):558-567

准噶尔盆地吉木萨尔凹陷二叠系梧桐沟组作为一套重要的储集岩,具有良好的油气成藏前景,但对其层序划分及地层沉积样式的认识一直存在争议。在构造背景分析的基础上,结合岩芯、测井及地震资料,对研究区梧桐沟组层序地层划分及地层沉积样式研究表明,梧桐沟组沉积时期构造强度较弱,地形较为平缓,地层在全区稳定分布;中晚二叠世盆地发生造山运动,吉木萨尔凹陷东南边缘区域经过构造抬升,上部地层遭受不同程度的剥蚀,形成了现今"底平顶削"的地层样式。以凹陷中部少数地层保存较全的井的地层叠加样式分析为基础,通过井-震结合识别不同类型界面,特别是最大湖泛面,建立了区域层序地层格架,即梧桐沟组为一个完整的长期基准面旋回(三级层序),并在其内部识别出5个中期旋回。梧桐沟组地层在不同的层序发育时期表现出不同的旋回叠加样式:下段沉积时期,即最大湖泛面以下,随着可容纳空间的增大,地层表现为明显的退积叠加样式;上段沉积时期,即最大湖泛面以上,随着可容纳空间的减小,地层表现为明显的进积叠加样式,符合沉积物体积分配原理。  相似文献   

基于重力及重力梯度数据的位场偏移成像     

田明阳  吴燕冈  张爽  颜鸿群  张瑞森 《世界地质》2018,37(1):218

为了验证位场偏移快速成像方法的有效性以及对比基于重力和重力梯度数据的偏移成像的效果,笔者利用MATLAB编写了重力及重力梯度数据位场偏移成像的算法,并进行了模型正演计算,发现基于梯度数据的偏移成像的横向分辨率、抗噪性和抗背景场能力好于重力数据的偏移成像,并且能够较好的确定模型的中心埋深。将此方法应用于葫芦岛市黑鱼沟的某铅锌矿洞的深度计算中,验证了该方法的有效性。  相似文献   

Jurassic and Cretaceous (Yanshannian) tectonics,magmatism and metallogenesis in South China: preface     

Xiaoyong Yang  Weidong Sun 《International Geology Review》2018,60(11-14):1321-1325

ABSTRACT

South China is famous for its poly-metal deposits, with more than 50% of global W and Sb reserves, 20% of global Sn reserves, as well as abundant Cu-Mo-Pb-Zn-Au-Ag, Ta, Nb, REE and U deposits. This special issue consists of 21 papers, reporting recent progress on Yanshannian tectonic evolution, magmatism and ore deposits in South China, aiming at better understandings on the Mesozoic large-scale magmatism and mineralization events.  相似文献   

基于多源数据约束的成矿动力学模拟——以宁芜盆地钟姑矿田典型矿床为例   总被引：1，自引：0，他引：1       下载免费PDF全文

贾 蔡 袁 峰李晓晖  胡训宇廖宝胜孙维安  张明明沈 乐 《地质科学》2018,(4):1327-1346

数据驱动是大数据分析的特点之一。成矿过程的数值模拟即采用数据驱动方式,在基本的物理化学方程及地质模型基础上,通过定量的手段,模拟不同阶段、不同条件下成矿系统的演化过程,从而能够更深入、直观的讨论各种地质要素对成矿系统的影响,验证已有的成矿理论,获得新的认识。姑山铁矿床和杨庄铁矿床是宁芜火山岩盆地钟姑矿田内的典型矿床。前人研究显示,杨庄铁矿床为典型的充填-接触交代型热液矿床,而姑山铁矿床目前在成因上仍存在争议,存在岩浆成因和热液成因等多种观点。为了更好的对比和了解姑山铁矿床和杨庄铁矿床的成因及成矿过程,本文基于多源数据的综合解译剖面,采用力-热耦合数值模拟方法对与热液矿床密切相关的扩容空间的形成机制和特点开展研究。模拟结果显示,姑山铁矿床和杨庄铁矿床可能分属不同的成因类型;随着岩体的逐渐冷却,杨庄铁矿床内岩体和地层接触带会出现明显的扩容空间,可为成矿流体的汇聚及矿质的沉淀提供良好的条件,有利于热液矿床的形成;而姑山铁矿床内岩体和地层接触带只有局部区域出现扩容空间,同时体应变数值较小且形态变化大,并不利于大规模的流体汇聚及矿质的沉淀,姑山铁矿床可能主要为岩浆成因,并受少量热液的叠加改造。  相似文献   

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model     

Yandong Yang  Kairong Hong  Zhenchuan Sun  Kui Chen  Fengyuan Li  Jianjun Zhou  Bing Zhang 《Geotechnical and Geological Engineering》2018,36(6):3391-3398

The problem of disc cutter wear is inevitable when shield or TBM excavating hard rock for a long distance, thus, the study of disc cutter wear model has an important project value on predicting its service life and replacement opportunity. It is put forward by analyzing disc cutter wear mechanism that the main wear form is abrasive wear, which is based on plastic removal mechanism. Then, disc cutter wear rate and linear wear rate prediction models are obtained by approximate calculation and mathematical deduction, which are based on Rabinowicz equation and CSM model. At last, the two models are verified through field test data from three projects, and the results show that the prediction model can accurately reflect the real wear situation of disc cutter.  相似文献   

微波消解-电感耦合等离子体质谱法测定海泡石中的稀土元素   总被引：3，自引：3，他引：0  

张楠  徐铁民  吴良英  魏双  方蓬达  王家松 《岩矿测试》2018,37(6):644-649

海泡石是一种纤维状含水的富镁硅酸盐黏土矿,其中的稀土元素含量在1×10~(-7)～1×10~(-5)之间,目前还没有建立海泡石中稀土元素的国家标准分析方法。测定岩石中的稀土元素主要是采用电感耦合等离子体质谱法(ICP-MS),样品前处理一般采用封闭溶矿和碱熔,但这两种处理方法耗时较长,效率不高。本文通过比较硝酸-氢氟酸-过氧化氢、硝酸-氢氟酸、硝酸-过氧化氢三种样品前处理方法,确定使用硝酸-氢氟酸溶矿,然后进行微波消解同时赶去氢氟酸,避免氢氟酸与稀土元素生成难溶的氟化物,再采用ICP-MS法测定15种稀土元素的含量。由于海泡石中的镁含量较高,为降低基体效应,以~(103)Rh和~(185)Re作内标补偿基体效应和校正灵敏度漂移,各元素测定值的准确性显著提高,回收率为91. 2%～110. 9%,检出限为0. 002～0. 011μg/L,精密度≤2. 79%。本方法与封闭酸溶ICP-MS法的分析结果吻合较好,且用酸量少(7 mL),溶矿效率高(1 h),检出限更低。  相似文献   

四川盆地：周缘活动主控下形成的叠合盆地   总被引：1，自引：0，他引：1       下载免费PDF全文

刘树根 邓宾孙玮  钟勇李智武  李金玺姜磊 《地质科学》2018,(1):308-326

四川盆地位于扬子板块西缘和青藏高原东缘,地震勘探资料等揭示盆地前寒武纪基底保存完整的古俯冲带和地堑-地垒结构,说明盆地基底后期构造活动非常稳定;显生宙以来经历晚震旦世-石炭纪、二叠纪-中三叠世两幕克拉通边缘强拉张-强挤压,而克拉通内弱拉张-弱挤压的构造演化过程,体现出盆地内部稳定性结构沉积演化特征。克拉通内弱拉张初期以海相碳酸盐岩大面积稳定沉积（即震旦系灯影组和二叠系栖霞-茅口组）和随后的风化壳岩溶作用（即桐湾期、东吴期等不整合面）为特征,弱拉张期以拉张槽（如：绵阳-长宁拉张槽和开江-梁平拉张槽等）的形成为典型特征;弱挤压则以古隆起（如：加里东期乐山-龙女寺古隆起、印支期泸州古隆起等）的发育为典型特征。四川盆地晚三叠世后的前陆盆地演化阶段受控于其周缘造山带逆冲推覆构造活动,是现今地貌和构造盆地的主要建造期,形成了四川盆地周缘突变（线型）和渐变（弥散型）两种盆山结构。盆地西边界（龙门山）和北边界（米仓山-大巴山）即是线型突变边界,也是扬子地块（板块）的边界,边界几何形状和扬子板块刚性特征对盆山系统结构-构造特征等有较大的控制作用;四川盆地的东边界（齐岳山-大娄山）和西南边界（大凉山）即是渐变弥散型边界,同时也是板（陆）块内部的边界,它们受控于邻区（盆外）的构造变形和盆内沉积盖层中滑脱层的分布特征。受控于盆地（克拉通）周缘活动,四川盆地垂向上前寒武纪基底与盖层、盖层内早期和晚期构造具解耦特征。基底与盖层构造的解耦有利于盆地内部前寒武纪基底结构构造的保存和盖层内大型隆-坳结构的形成演化;盖层内早期和晚期构造的解耦有利于早期构造免遭后期破环,对深层油气藏的保存意义重大。总之,四川盆地可能是具独特形成过程和特征的叠合盆地新类型,其突出特征表现为周缘活动、内部稳定及早期和晚期构造解耦。  相似文献   

Groundwater sustainability and groundwater/surface-water interaction in arid Dunhuang Basin,northwest China   总被引：1，自引：0，他引：1  

Jingjing Lin  Rui Ma  Yalu Hu  Ziyong Sun  Yanxin Wang  Colin P. R. McCarter 《Hydrogeology Journal》2018,26(5):1559-1572

The Dunhuang Basin, a typical inland basin in northwestern China, suffers a net loss of groundwater and the occasional disappearance of the Crescent Lake. Within this region, the groundwater/surface-water interactions are important for the sustainability of the groundwater resources. A three-dimensional transient groundwater flow model was established and calibrated using MODFLOW 2000, which was used to predict changes to these interactions once a water diversion project is completed. The simulated results indicate that introducing water from outside of the basin into the Shule and Danghe rivers could reverse the negative groundwater balance in the Basin. River-water/groundwater interactions control the groundwater hydrology, where river leakage to the groundwater in the Basin will increase from 3,114?×?10⁴ m³/year in 2017 to 11,875?×?10⁴ m³/year in 2021, and to 17,039?×?10⁴ m³/year in 2036. In comparison, groundwater discharge to the rivers will decrease from 3277?×?10⁴ m³/year in 2017 to 1857?×?10⁴ m³/year in 2021, and to 510?×?10⁴ m³/year by 2036; thus, the hydrology will switch from groundwater discharge to groundwater recharge after implementing the water diversion project. The simulation indicates that the increased net river infiltration due to the water diversion project will raise the water table and then effectively increasing the water level of the Crescent Lake, as the lake level is contiguous with the water table. However, the regional phreatic evaporation will be enhanced, which may intensify soil salinization in the Dunhuang Basin. These results can guide the water allocation scheme for the water diversion project to alleviate groundwater depletion and mitigate geo-environmental problem.  相似文献   

Numerical analysis of effect of baffle configuration on impact force exerted from rock avalanches     

YuZhang Bi  YanJun Du  SiMing He  XinPo Sun  DongPo Wang  XinPo Li  Heng Liang  Yong Wu 《Landslides》2018,15(5):1029-1043

In mountainous areas, channelized rock avalanches swarm downslope leading to large impact forces on building structures in residential areas. Arrays of rock avalanche baffles are usually installed in front of rigid barriers to attenuate the flow energy of rock avalanches. However, previous studies have not sufficiently addressed the mechanisms of interaction between the rock avalanches and baffles. In addition, empirical design approaches such as debris flow (Tang et al., Quat Int 250:63–73, 2012), rockfall (Spang and Rautenstrauch, 1237–1243, 1988), snow avalanches (Favier et al., 14:3–15, 2012), and rock avalanches (Manzella and Labiouse, Landslides 10:23–36, 2013), which are applied in natural geo-disasters mitigation cannot met construction requirements. This study presents details of numerical modeling using the discrete element method (DEM) to investigate the effect of the configuration of baffles (number and spacing of baffle columns and rows) on the impact force that rock avalanches exert on baffles. The numerical modeling is firstly conducted to provide insights into the flow interaction between rock avalanches and an array of baffles. Then, a modeling analysis is made to investigate the change pattern of the impact force with respect to baffle configurations. The results demonstrate that three crucial influencing factors (baffle row numbers, baffle column spacing, and baffle row spacing) have close relationship with energy dissipation of baffles. Interestingly, it is found that capacity of energy dissipation of baffles increases with increasing baffle row numbers and baffle row spacing, while it decreases with increasing baffle column spacing. The results obtained from this study are useful for facilitating design of baffles against rock avalanches.  相似文献